Wheeler Scope Leveling Tool
Wheeler Scope Leveling Tool Price Details:
| Regular Price | : | |
| Price Now Only | : | $ 12.99 |
| You Save | : | $ Discount up to : 40.93% |
| Availability | : | In Stock! Only 9 More at $ 12.99 Order now! |
| Shipping | : | Saturday and Sunday delivery available for certain locations |
| Rating | : |
This special offers is only for limited time, We have found most affordable price, Check out now when stock last to avoid disappointment!
Wheeler Scope Leveling Tool Short Description
The simplest, most correct scope leveling technique ever devised. Misaligned crosshairs rob you of precise bullet placement, especially at extended range, exactly where it counts. Crooked crosshairs trigger your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and expensive knowledge. The makers of some scope leveling devices inform you that leveling your scope to the top rated of the base produces a level scope. Don’t believe it! An correct rifle needs level crosshairs, and the Level-Level-Level provides you the signifies to level your scope perfectly in only minutes. Level your scope as you mount it on your rifle. The magnetic base in the rifle level bridges the bolt raceway, permitting you to position your rifle perfectly level. Then level the scope, tighten the rings, and the job is completed. Performs with practically any bolt-action rifle, and is adaptable to other styles.
Wheeler Scope Leveling Tool Crucial Attributes
- The magnetic base in the rifle level bridges the bolt raceway, allowing to position your rifle perfectly level
- Performs with virtually any bolt-action rifle
- Essential to level the scope, tighten the rings, and then the job is accomplished
- Adaptable to other designs
List Price tag: $ 21.99
Price: $ 12.99
NSSF’s Ryan Cleckner shows you how to effectively set up your rifle and scope combination so that it naturally aligns with your eye. (NSSF Video)















17 of 18 people found the following review helpful Only lasted for 5 months, May 5, 2011 By afghanmarine – Amazon Verified Purchase(What’s this?) This review is from: Wheeler Scope Leveling Tool (Sports) I bought this to check my recent installation of a Nikon scope. It worked well the first time I used it. The next time I used it was 3 months later because the nikon on my .300WinMag shifted due to recoil. It worked well for that job too. When predator ‘season’ was getting close I wanted to check my gear before wasting a morning with un-level sights. The plastic on the bottom of the units was begining to warp! Neither unit would read level even on a surface that was proven to be so by my larger levels. I expected a piece of gear that would last through more than 4-5 months. Help other customers find the most helpful reviews Was this review helpful to you? | Comments (2)
9 of 9 people found the following review helpful Quick rifle scope leveling, August 23, 2007 By Plinker Tinker “JC” (Left Coast, USA) – Amazon Verified Purchase(What’s this?) This review is from: Crosshair Alignment LvlLvlLvl – Optics – Bore Sighting (Misc.) Product does just what it states. Allows me to quickly position scope in rings without guessing about whiether I have rifle and crosshairs level or not. Used three times since acquiring and more to do for hunting season. Great idea that works! Help other customers find the most helpful reviews Was this review helpful to you? | Comment
17 of 20 people found the following review helpful Works Just Fine, June 1, 2009 By R. Stewart (Louisiana) – This review is from: Wheeler Scope Leveling Tool (Sports) I read the two reviews and decide to take a chance. After my package arrived I checked the levels and the small one that sets on top of the scope was off a wee bit. The level glass fits just so in the plastic base and with little pressure it was seated in place. The scope is mounted on a M48 Mauser scout scope style and it was mounted by a gunsmith. Well I will not use him again and the scope was canted about 3 degrees counter clock wise. This tool works, just take your time, use a little common sense and you will get your scope aligned. Safety first!! Help other customers find the most helpful reviews Was this review helpful to you? | Comment
ok thnx man?
I thin what you? are referring to is eye relief of the scope.. Either buy rings that allow you to mount the scope properly, or buy a scope with a longer eye relief.
so if i am not mistaken, scope shadow is that hazy thing that you see when you look through the scope
cause when i look through the scope i also see a black ring inside the scope wich will disappear when i move my head left to right or for/backwards from the scope
,i figured this would also have something to do with moving the sope on the rings but there is no room to move the scope so what would be the best thing to solve this problem kind? regards
I am not a fan of the slimmed down stock on the LTR, but for a smaller? package for .223, it may do the trick nicely. The wider stock onthe 700p has a flatter forend which may help stabilize the rifle on a bench better.
Yes, but it is not needed. I had some work done on my rifle for the bottom metal and the gunsmith took it upon himself to duracoat my bolt and I wasn’t exactly happy. When I paint rifles, I generally mask off the bolt body.?
Hey ryan? thanks for the great videos!! Is that a aci on your scope? If so who makes it or witch one do you recommend?
Ryan, your videos are excellent, thanks. I am about to “pull the trigger” and buy a 700p, but I am trying to decide between the regular P with the 26″ barrel, or the 700p LTR WITH? THE 20 fluted barrel. Thoughts? It would be for target shooting on a bench. (223 cal). It looks like the stock on the LTR may not be the same as the regular P, which makes me a little pervious. It’s still HS precision, but “slimmed down”. Thank you sir!
Excellent explanation, what more can I say. Ryan’s? the best. Thanks.
what is your scope and what? brand is your cheek rest? I have tried to keep adjusting a cheek rest but the highest ive gone was 1 inch and that wasn’t high enough
Thanks for? such a wonderful primer.
you can paint? your bolt?
Yes, you? should adjust the scope so that it works for you at the highest power setting. If it is in the correct position at the highest power, it will be perfect for the lowest power too.
Thanks! So if I have it mounted at 3x with a full view, should I turn it to 9x and move the entire mount backwards or forwards until I get a full view on that power and then leave it there? Would I run into the same problem where on 9x its looking? good but at 3x, not so much?
Ryan covers leveling the scope at? 08:00
I tighten mine freehand with a wrench – I don’t even own a torque wrench for? mounting my scopes. You should not be adjusting your scope after taking shots. You should follow the steps in the video and get the scope setup for you even before heading to the range. Once it is setup properly, it fits you regardless of what range you are shooting at.
That happens on all variable power scopes. That’s why I recommend starting the mounting process on low power (most forgiving zone) and then moving up to the? highest power to fine tune your adjustments. The narrower field of view at high power is what you want to be adjusted for.
I showed how to level the scope to the rifle. If the crosshairs are crooked in the scope, it would not help to mount the scope crooked just to get the crosshairs level. Doing so would mean that adjustments would be made on whatever crooked axis the? scope was mounted on to get the crosshairs level. If it came down to it, I’d rather have crooked crosshairs that adjusted straight up and down for elevation rather than level crosshairs which adjusted diagonally.
When tightening the scope rings, is it really that important toruqe to 30lbs or can you just tighten it freehand w/ wrench.I just tightened all of the screws until I felt it was enough. Also, last time I went to the range I was attempting to sight? in my rifle at 100 yards. I was having a hard time because I was adjusting after every shot. I had a feeling the scope itself was the issue. But, if the issue is my shooting. Would it be accurate at 100yds if I shot slightly under the bullseye at 50yds
I have a? Leupold Mark AR mounted and the eye relief is great at 3x but when I turn it up to 9x the scope shadow really narrows the view (from full view to a quarter size diameter view). Is this normal or am I doing something wrong? Should you mount it with full eye relief on the highest power or lowest?